1、Scope of application
The organic waste gas flow rate is less than 200 Nm3/h; the general exhaust gas concentration is more than 5000 mg/Nm3.
2、application area
The organic waste gas produced in the process of industrial kiln burning, such as the process of soft magnetic ferrite drainage, the process of Zinc Oxide valve cutting, the firing process of graphite negative electrode, the sintering process of electronic components and so on. Finally, the exhaust emission achieves no odor and smokeless purification effect, which is superior to the national emission standard.
3、Equipment features
1, according to the different needs of customers, exhaust air volume and exhaust gas concentration, we design an organic waste gas electric heating and purifying equipment meeting the working conditions in the field.
2, compact and flexible, easy to install, can be fixed beside the equipment, or directly installed on the exhaust pipe of the top of the equipment to reduce the area of occupation
3, energy saving effect is good, according to different ignition points of exhaust gas, adjust the control temperature of incinerator.
4. The control is simple, convenient and pollution-free. The furnace body is heated by resistance wire, and there is no two pollution of fuel.
4、Application field
